LoL Script Setup Guide
Follow the steps below to successfully set up and use the LoL Script. Make sure your PC is prepared before launching.
🛠️ Preparation (Important)
Before you begin, make sure your system is configured properly. Please check the following settings in your BIOS and Windows:
- ✅ TPM (Trusted Platform Module) ON/OFF does not matter.
- ✅ Virtualization ON/OFF does not matter.
- ✅ USB is required
- ❌ Windows Defender must be disabled.
- ❌ Secure Boot must be disabled.
- ❌ HVCI (Hypervisor-protected Code Integrity) must be turned off.
- ✅ Your system must be up-to-date with the latest version of Windows (Windows 10 or Windows 11 are supported).
🛠️ How to Use the LoL Script
- Step 1: Insert Your USB into your computer. Download the LoL Script.rar (Rar Password: 123)️ file and extract it to your desktop. Open the loader.
- Step 2: Open the Loader and select the LoL Script option. Enter the key you received after your purchase. The LoL Script settings screen will appear, where you can adjust your preferences.
- Step 3: The LoL Script loader will automatically transfer the necessary files to your USB stick. Please ensure that your USB is formatted as FAT32 and is empty.
- Step 4: Boot from USB Restart your PC and enter the BIOS settings. Go to the Boot Menu and set your USB stick as the primary boot device.
- Step 5: Remove USB When Prompted Once your PC boots from the USB, you will see a message saying: “Remove USB Stick”. Unplug your USB at this moment. Your PC will restart automatically after a few minutes.
✅ You’re All Set! Your system is now ready. Create a game in League of Legends and test it.
⚠️ Important Notes
The LoL Script supports both AMD and Intel processors.
If you want to disable the script, simply restart your computer normally. If you boot from USB again, the script will automatically run at the start of each game.