Valorant Spoofer Setup Guide

Valorant Spoofer Setup Guide

Follow the steps below to successfully set up and use the Valorant Spoofer. Make sure your PC is prepared before launching.

🛠️ Preparation (Important)

Before you begin, make sure your system is configured properly. Please check the following settings in your BIOS and Windows:

  • ✅ TPM (Trusted Platform Module) must be enabled in BIOS.
  • ✅ Virtualization must be enabled in BIOS.
  • ❌ Secure Boot must be disabled in BIOS.
  • ❌ HVCI (Hypervisor-protected Code Integrity) must be turned off.
  • ❌ Windows Defender must be disabled in Windows settings.

Make sure your system is running Windows 10 or Windows 11, and all Windows updates are installed.

🛠️ How to Use the Valorant Spoofer

  1. Step 1: Insert Your USB into your computer. Download the Valo_Lol_One_Click_Spoof.rar (Rar Password: 123) file and place it on your desktop. (Password: 123)
  2. Step 2: Open the Loader and select the Spoofer option. Enter the key you received after your purchase.
  3. Step 3: Automatic File Transfer The loader will automatically transfer the necessary files to your USB stick and close on its own.
  4. Step 4: Boot from USB Restart your PC and enter the BIOS settings. Go to the Boot Menu and set your USB stick as the primary boot device.
  5. Step 5: Remove USB When Prompted Once your PC boots from the USB, you will see a message saying: “Remove USB Stick”. Unplug your USB at this moment. Your PC will restart automatically after a few minutes.

✅ You’re All Set! Your system is now spoofed and ready to launch the game safely.

⚠️ Important Notes

This spoofer works exclusively with AMD processors. If you have an Intel CPU, the spoofer will not function properly.

There is no need to run the run.bat file repeatedly. Once the spoofer is installed on your USB stick, spoofing will be applied every time you boot your computer from USB. If you boot normally, the spoofer will not activate. Always boot from USB for spoofing to work.

Scroll to top